object(stdClass)#209 (32) {
["vid"]=>
string(4) "7409"
["uid"]=>
string(4) "1801"
["title"]=>
string(14) "Seatpost clamp"
["log"]=>
string(0) ""
["status"]=>
string(1) "1"
["comment"]=>
string(1) "2"
["promote"]=>
string(1) "0"
["sticky"]=>
string(1) "0"
["nid"]=>
string(4) "7409"
["type"]=>
string(5) "forum"
["language"]=>
string(3) "und"
["created"]=>
string(10) "1333903679"
["changed"]=>
string(10) "1334513915"
["tnid"]=>
string(1) "0"
["translate"]=>
string(1) "0"
["revision_timestamp"]=>
string(10) "1334513915"
["revision_uid"]=>
string(1) "1"
["taxonomy_forums"]=>
array(1) {
["und"]=>
array(1) {
[0]=>
array(2) {
["tid"]=>
string(1) "3"
["taxonomy_term"]=>
object(stdClass)#211 (7) {
["tid"]=>
string(1) "3"
["vid"]=>
string(1) "2"
["name"]=>
string(23) "BikeCAD Feature Request"
["description"]=>
string(73) "If there's a feature you'd like to see added to BikeCAD, suggest it here."
["format"]=>
NULL
["weight"]=>
string(1) "5"
["vocabulary_machine_name"]=>
string(6) "forums"
}
}
}
}
["body"]=>
array(1) {
["und"]=>
array(1) {
[0]=>
array(5) {
["value"]=>
string(168) "Hi Brent
Any chance you can add a seatpost clamp option?
While not "structurally important", on many bikes it is colour matched to other components.
Regards
Jim"
["summary"]=>
string(0) ""
["format"]=>
string(13) "filtered_html"
["safe_value"]=>
string(194) "
Hi Brent
Any chance you can add a seatpost clamp option?
While not "structurally important", on many bikes it is colour matched to other components.
Regards
Jim
"
["safe_summary"]=>
string(0) ""
}
}
}
["field_forum_image"]=>
array(0) {
}
["cid"]=>
string(4) "1906"
["last_comment_timestamp"]=>
string(10) "1525737906"
["last_comment_name"]=>
string(0) ""
["last_comment_uid"]=>
string(3) "292"
["comment_count"]=>
string(1) "5"
["locations"]=>
array(0) {
}
["location"]=>
array(0) {
}
["name"]=>
string(9) "maclejend"
["picture"]=>
string(1) "0"
["data"]=>
string(59) "a:1:{s:5:"block";a:1:{s:13:"gmap_location";a:1:{i:0;i:1;}}}"
["forum_tid"]=>
string(1) "3"
["entity_view_prepared"]=>
bool(true)
}
Hi Brent
Any chance you can add a seatpost clamp option?
While not "structurally important", on many bikes it is colour matched to other components.
Regards
Jim
A seatpost clamp is a great idea. I will plan to include that in the next update along with a braze-on for a seatpost binder bolt.
Stay tuned...
The inner diameter of the Seatpost Clamp follows the diameter of the Seatpost.
I think the inner diameter of the Seatpost Clamp should follow the diameter of the Seat tube.
When I make the Seattube invisible (exclude the tube from the design), the Seatpost Clamp disappears.
Why ?
I've tried to replicate this scenario but I have not been able to do it. Right off the bat, there is no option to exlude the seat tube. You can make it discontinuous, but I have not found that to have any impact on the saddle clamp. Could you please send me a BCAD file containing an example of this issue?
I have assumed I do not have to adjust values for A. B and X, when choosing another Seat tube diameter.
Because the Seat post diameter is not a parameter in the Seat post clamp window.
I agree that if you make a dramatic change to the seatpost diameter, it would be nice to have the seatpost clamp specs parametrically linked to the seat tube diameter. However, it was a deliberate choice to set things up the way I did. Some will design a single clamp and then bore it out to a few different internal diameters. Alternatively, some clamps are sold with inserts so the same clamp can be used with different seat tube diameters. An example is below.