BikeCAD Pro How To
If you've got a question about using BikeCAD Pro, the stand alone application for frame builders, bike shops and fit specialists, post it here.Log in to post new content in the forum.
Topic / Topic starter | Replies | Last post | |
---|---|---|---|
FreeCad V21.1 errors by jbotjbot » Tue, Sep 12, 2023 |
7 |
by Baker SJ Thu, Sep 26, 2024 |
|
Compound Miter on Seat Tube rather than Downtube. by BLZ2024 » Sun, Aug 25, 2024 |
1 |
by Brent Sun, Aug 25, 2024 |
|
chainstay miters not symmetrical by BLZ2024 » Thu, Aug 22, 2024 |
1 |
by Brent Fri, Aug 23, 2024 |
|
Why are Ribble's measurements so weird? Can't get them to add up by Kate Corden » Mon, Jun 3, 2024 |
2 |
by Brent Tue, Jun 4, 2024 |
|
unicrown fork by randoflex » Tue, Apr 16, 2024 |
1 |
by stevediaz Fri, May 24, 2024 |
|
Ver 20.6 Strange Behavior by falsea » Tue, Apr 30, 2024 |
4 |
by Brent Tue, Apr 30, 2024 |
|
Allotec C64 dropous by mylesgallagher » Sun, Apr 28, 2024 |
1 |
by Brent Tue, Apr 30, 2024 |
|
BikeCAD not opening folders by Tarmacadam » Tue, Apr 9, 2024 |
3 |
by Brent Wed, Apr 10, 2024 |
|
Single Use or Home user License? by cowrevenge » Sun, Jan 1, 2023 |
10 |
by Brent Sat, Apr 6, 2024 |
|
Updating by paul pinfold » Thu, Dec 7, 2023 |
14 |
by timdb Sat, Mar 2, 2024 |
|
Seat stay aux view and dropouts by nickjensen » Sat, Jan 27, 2024 |
2 |
by nickjensen Tue, Jan 30, 2024 |
|
Can't get wheelbase, front centre and front end correct by Kate Corden » Fri, Jan 26, 2024 |
2 |
by Kate Corden Tue, Jan 30, 2024 |
|
AI doesn't seem to work by nickjensen » Thu, Nov 23, 2023 |
11 |
by fietsschuur Sun, Dec 31, 2023 |
|
AI Options by Cyco » Tue, Dec 12, 2023 |
1 |
by Brent Wed, Dec 13, 2023 |
|
Modelling MTB Bar with Sweep and rise by mathias scherer » Mon, Dec 11, 2023 |
2 |
by Brent Mon, Dec 11, 2023 |
|
Full Sus by Lucas G » Thu, Dec 7, 2023 |
1 |
by Brent Thu, Dec 7, 2023 |
|
Can you add Schindelhauer's tail hook? by xovox » Fri, Sep 22, 2023 |
1 |
by Brent Fri, Sep 22, 2023 |
|
Setting the extension of the headtube above the top tube (not quite same as tutorial?) by cat8 » Sun, Jul 30, 2023 |
1 |
by Brent Tue, Aug 1, 2023 |
|
Can't set curved seat tube S1 to zero. by Koncept » Sun, Jun 18, 2023 |
4 |
by Brent Sun, Jul 2, 2023 |
|
additional Headtube, how to realise? by kopierpaste » Thu, Jul 15, 2021 |
4 |
by Brent Sat, May 13, 2023 |
|
how can i make it so the front rim and rear rim are colored different by jothain » Thu, Apr 27, 2023 |
1 |
by Brent Thu, Apr 27, 2023 |
|
Bike Cad Pro version 19.0 crashing by Rourkie » Sat, Feb 11, 2023 |
13 |
by drapercycles Sun, Apr 9, 2023 |
|
Sliding Dropouts - 135mm spacing by falsea » Fri, Mar 31, 2023 |
3 |
by Brent Sat, Apr 1, 2023 |
|
BikeCAD 19.0 won't open | "Can't extract configuration files" by nick.graham » Sat, Jan 21, 2023 |
9 |
by Brent Mon, Feb 13, 2023 |
|
Bike with Bosch motor fails export to Freecad by jbotjbot » Wed, Feb 8, 2023 |
2 |
by jbotjbot Wed, Feb 8, 2023 |
|
paragon drop out dimensions on seat stay and chain stay view.. by AplombCycles » Sat, Jan 28, 2023 |
4 |
by Brent Sun, Jan 29, 2023 |
|
Exporting to FreeCAD by BAHL Cycle Works » Mon, Jul 19, 2021 |
18 |
by Brent Fri, Jan 27, 2023 |
|
Rotating the frame in the fixture - dimensions adjustment by Goldi » Sat, Dec 10, 2022 |
2 |
by Goldi Mon, Dec 12, 2022 |
|
Two fades in paint? by BAHL Cycle Works » Sun, Dec 11, 2022 |
1 |
by Brent Sun, Dec 11, 2022 |
|
Unicycle Design w/ BikeCad by Andrew R Stewart » Wed, Nov 16, 2022 |
1 |
by Brent Thu, Nov 17, 2022 |
|
Modelling Paragon 34/44 tapered head tubes by cwakefield » Sun, Nov 6, 2022 |
12 |
by Brent Mon, Nov 14, 2022 |
|
Anvil Journeyman 3.1 Fixture Setup by Irony Cycleworks » Fri, Jul 5, 2013 |
6 |
by juangutierrez Sun, Nov 6, 2022 |
|
Cannot export miter template of frame including extra tube attached to one tube only by zigzag.rio » Sat, Oct 29, 2022 |
1 |
by Brent Thu, Nov 3, 2022 |
|
Inputting disc side dropouts by jiggywithitframes » Sat, Oct 22, 2022 |
2 |
by jiggywithitframes Sat, Oct 22, 2022 |
|
Static Dropouts by falsea » Thu, Oct 20, 2022 |
2 |
by falsea Thu, Oct 20, 2022 |
|
Auxillary View for fork to see tire / fender clearance by rideone » Thu, Jun 9, 2022 |
11 |
by rideone Sat, Oct 1, 2022 |
|
chainstay inside angle? by Gibson-Cycles » Sun, Sep 25, 2022 |
1 |
by Brent Sun, Sep 25, 2022 |
|
Change Second Rider (Stoker) Anatomy by agoessling » Sun, Sep 18, 2022 |
1 |
by agoessling Sun, Sep 18, 2022 |
|
Chainstay/BB template diagram by vrbicycles » Fri, Sep 2, 2022 |
2 |
by vrbicycles Sat, Sep 3, 2022 |
|
Chain stays auxiliary view Z and S dims appear offset by shawncrowley » Mon, Aug 29, 2022 |
3 |
by Brent Fri, Sep 2, 2022 |
|
How to change tires on a road bike by patpot44 » Thu, Aug 4, 2022 |
2 |
by patpot44 Fri, Aug 12, 2022 |
|
plate style yokes?? by AplombCycles » Tue, Aug 2, 2022 |
1 |
by Brent Wed, Aug 3, 2022 |
|
Rear Rack Options by falsea » Wed, Jul 27, 2022 |
2 |
by falsea Wed, Jul 27, 2022 |
|
Entering Chain Stays data in bike cad ! help needed by clementc » Sat, Dec 4, 2021 |
4 |
by Brent Wed, Jul 27, 2022 |
|
Install problems on Win 10 pro 64 bit by Eric Keller » Thu, Jul 21, 2022 |
1 |
by Brent Fri, Jul 22, 2022 |
|
point to point dimension by tedwojcik » Mon, Jul 11, 2022 |
3 |
by tedwojcik Tue, Jul 12, 2022 |
|
Bikecad 18.0 with CargoBike Option by QuirinHelmle » Thu, Jun 2, 2022 |
1 |
by Brent Fri, Jun 10, 2022 |
|
Transferring saved dimensions between updated Bikecad versions by BAHL Cycle Works » Fri, May 27, 2022 |
3 |
by Brent Sat, Jun 4, 2022 |
|
Changing relative measurement and direction of bottle cages by cat8 » Mon, Mar 21, 2022 |
1 |
by Brent Tue, Mar 22, 2022 |
|
Free CAD Export - Bike Not Showing Up by flexionbikefit » Sun, Feb 20, 2022 |
2 |
by flexionbikefit Sun, Mar 13, 2022 |
|
Paragon Flanged Dropouts by flexionbikefit » Sat, Mar 12, 2022 |
3 |
by flexionbikefit Sun, Mar 13, 2022 |
|
looking at the impact of different forks by kenholmes » Sat, Mar 12, 2022 |
1 |
by Brent Sat, Mar 12, 2022 |
|
Working with FreeCAD by tandembiker » Mon, Feb 14, 2022 |
2 |
by tandembiker Thu, Feb 17, 2022 |
|
BikeCAD & Brew Bike Jig by bjlafave » Sat, Jan 29, 2022 |
1 |
by Good Dog Fri, Feb 11, 2022 |
|
Rear brake view from above by redfoxcykler » Fri, Feb 11, 2022 |
1 |
by Brent Fri, Feb 11, 2022 |
|
Files not found? by bluesteelfab » Wed, Feb 2, 2022 |
1 |
by Brent Wed, Feb 2, 2022 |
|
Chainstay flatmount template placing by simon.brabec » Thu, Jan 20, 2022 |
2 |
by simon.brabec Sat, Jan 22, 2022 |
|
Bike length with tires/fenders/anything by Goldi » Tue, Jan 18, 2022 |
1 |
by Brent Wed, Jan 19, 2022 |
|
BikeCad Pro and Design Archive by Cyclesnoir » Sun, Jan 16, 2022 |
1 |
by Brent Sun, Jan 16, 2022 |
|
Wide seat stays by QuirinHelmle » Thu, Jan 6, 2022 |
2 |
by QuirinHelmle Sun, Jan 9, 2022 |
|
Accurately modelling dropper posts by nickjensen » Fri, Dec 17, 2021 |
1 |
by Brent Sat, Dec 18, 2021 |
|
Slotted dropout overlap by jrmelanson » Sat, Nov 13, 2021 |
4 |
by jrmelanson Sun, Nov 14, 2021 |
|
Adding a yoke to non-drive side by konkul » Thu, Oct 28, 2021 |
1 |
by Brent Sat, Oct 30, 2021 |
|
Lock main triangle by wackor » Thu, Jun 1, 2017 |
4 |
by Brent Sat, Oct 9, 2021 |
|
TA Boost spacing by jrmelanson » Thu, Oct 7, 2021 |
1 |
by Brent Thu, Oct 7, 2021 |
|
Adding Dropout Designs Into BikeCAD Pro? by ben_at_pinnacle » Thu, Oct 7, 2021 |
1 |
by Brent Thu, Oct 7, 2021 |
|
Fork Travel and downtube clearance by jrmelanson » Mon, Oct 4, 2021 |
3 |
by jrmelanson Tue, Oct 5, 2021 |
|
Truss forks by louis segre » Tue, Sep 14, 2021 |
2 |
by louis segre Tue, Sep 21, 2021 |
|
Export pdf pb by genaud » Fri, Sep 3, 2021 |
1 |
by Brent Fri, Sep 3, 2021 |
|
ABOUT Embedding a Custom Applet on our Website by GuidolinPepe » Tue, Aug 24, 2021 |
2 |
by GuidolinPepe Wed, Aug 25, 2021 |
|
Gearing graph red value by gaik » Tue, Aug 24, 2021 |
2 |
by gaik Wed, Aug 25, 2021 |
|
Bending tubes (BikeCAD vs Fusion) by falsea » Fri, Aug 13, 2021 |
1 |
by Brent Fri, Aug 13, 2021 |
|
Chainstay length with asymmetric dropouts by jrmelanson » Thu, Aug 5, 2021 |
7 |
by Brent Fri, Aug 13, 2021 |
|
17.1, config folder not updating from 15 by Acer » Thu, Aug 12, 2021 |
1 |
by Brent Thu, Aug 12, 2021 |
|
Miter templates by BAHL Cycle Works » Fri, Aug 6, 2021 |
3 |
by BAHL Cycle Works Wed, Aug 11, 2021 |
|
Setting correct Chainline using W3 by BAHL Cycle Works » Fri, Aug 6, 2021 |
1 |
by Brent Sat, Aug 7, 2021 |
|
Sliding dropouts - frame not locking by crembz » Sun, Aug 1, 2021 |
7 |
by crembz Tue, Aug 3, 2021 |
|
Seat stay placement on top tube by falsea » Thu, Jul 29, 2021 |
2 |
by falsea Mon, Aug 2, 2021 |
|
Exporting tubes as STP files by benhudson » Tue, Feb 9, 2021 |
6 |
by GunPilot Wed, Jul 7, 2021 |
|
Cannot export pictures after update by nbesnard » Wed, Jun 30, 2021 |
2 |
by nbesnard Thu, Jul 1, 2021 |
|
Loading issue by Cyco » Mon, Jun 21, 2021 |
3 |
by Brent Mon, Jun 28, 2021 |
|
Chain stay/seat stay not automatically connecting to Drop outs by Porter » Mon, Jun 28, 2021 |
1 |
by Brent Mon, Jun 28, 2021 |
|
Fork Crown Clearance disappearing fork by revdoc » Mon, Jun 28, 2021 |
2 |
by revdoc Mon, Jun 28, 2021 |
|
Eccentric BBs and linear SS/TT by Ben Cooper » Sun, May 31, 2015 |
3 |
by visusest Wed, Jun 23, 2021 |
|
Seat stay "caps" by eduleston » Thu, Jun 17, 2021 |
2 |
by eduleston Mon, Jun 21, 2021 |
|
custom yoke by chumba » Thu, Jun 17, 2021 |
2 |
by chumba Fri, Jun 18, 2021 |
|
BikeCad_16_configuration not downloaded along with program by chumba » Thu, Jun 10, 2021 |
3 |
by Brent Sun, Jun 13, 2021 |
|
Fork Crown Forks by correomartell » Fri, Apr 30, 2021 |
3 |
by Brent Sun, May 2, 2021 |
|
Bikecad Pro V16 runs but won't install by bike4travel » Fri, Apr 9, 2021 |
2 |
by bike4travel Fri, Apr 9, 2021 |
|
Anvil journeyman set up by radsurf » Mon, Apr 5, 2021 |
1 |
by Brent Mon, Apr 5, 2021 |
|
BikeCAD 16 stuck on Big Sur 11.2.3 (sometimes) by Goldi » Sat, Apr 3, 2021 |
3 |
by Brent Sun, Apr 4, 2021 |
|
Fit Advisor rider rendering by GunPilot » Fri, Apr 2, 2021 |
2 |
by GunPilot Sun, Apr 4, 2021 |
|
Professional Freelancers needed for bike design by hmulhim » Sat, Apr 3, 2021 |
1 |
by hmulhim Sat, Apr 3, 2021 |
|
Apple M1 - Big Sur by LVBF » Tue, Mar 30, 2021 |
2 |
by Brent Wed, Mar 31, 2021 |
|
Lina Jari Geometry Upgrade by hmulhim » Wed, Mar 31, 2021 |
0 |
by hmulhim Wed, Mar 31, 2021 |
|
Centerlines for Battery Remain After Selecting Location 'None' by ekline309 » Thu, Mar 4, 2021 |
1 |
by Brent Fri, Mar 5, 2021 |
|
Intersecting Top Tube Down Tube Miter Angle by chumba » Wed, Mar 3, 2021 |
1 |
by Brent Wed, Mar 3, 2021 |
|
Entering Chain Stay or Seat stay inputs from a Columbus drawing file by Stefano Cycles » Wed, Feb 17, 2021 |
5 |
by Brent Thu, Feb 18, 2021 |
|
drawing cantilever brakes by randoflex » Mon, Feb 1, 2021 |
2 |
by randoflex Mon, Feb 1, 2021 |
|
Axle and dropout aren't lining up by pimpmasterjazz » Mon, Jan 18, 2021 |
2 |
by pimpmasterjazz Wed, Jan 20, 2021 |
|
Converting Windows bikecad files to work on mac by workshop » Wed, Jan 20, 2021 |
1 |
by Brent Wed, Jan 20, 2021 |
|
Dropout view in the additional Stay-view by Salbaik » Sun, Jan 17, 2021 |
1 |
by Brent Sun, Jan 17, 2021 |
|
Sloped Fork Crowns? by morrisond » Sun, Dec 2, 2018 |
4 |
by Brent Fri, Jan 1, 2021 |
|
Printing Chainstays by rpiontek » Sat, Dec 28, 2013 |
9 |
by itorralbo Wed, Nov 4, 2020 |
|
download blocked by Avast by Slapshot » Thu, Nov 10, 2016 |
3 |
by softwareinspect Fri, Oct 30, 2020 |
|
Open bike from CSV Building Specs Export? by Lyleregenwetter » Tue, Oct 6, 2020 |
10 |
by Brent Wed, Oct 21, 2020 |
|
Pin BikeCAD shortcut to taskbar, Windows 7 Pro by Tyler » Tue, Jun 21, 2016 |
3 |
by Brent Tue, Sep 29, 2020 |
|
ISCG '05 and '03 by SUBA Cycles » Wed, Sep 16, 2020 |
0 |
by SUBA Cycles Wed, Sep 16, 2020 |
|
How do do elevated CS or remove a CS from one side by 4216 » Thu, Sep 10, 2020 |
2 |
by 4216 Thu, Sep 10, 2020 |
|
Turn off paint by john8 » Fri, Jul 17, 2020 |
4 |
by Brent Wed, Jul 22, 2020 |
|
Offset seat tube and direct mount derailleur X dimension. by macatarere » Mon, Jun 15, 2020 |
2 |
by macatarere Tue, Jun 16, 2020 |
|
Front Derailleur mount offset by cj0 » Wed, Jun 15, 2016 |
3 |
by macatarere Mon, Jun 15, 2020 |
|
C/S Dialog Box Greyed Out - Help by tim@velosmith.com.au » Sun, Jun 7, 2020 |
2 |
by tim@velosmith.com.au Sun, Jun 7, 2020 |
|
Saving File Error by bluesteelfab » Fri, Jun 5, 2020 |
1 |
by Brent Sat, Jun 6, 2020 |
|
Spacing in between seat stays at ST? by BAHL Cycle Works » Sat, May 9, 2020 |
3 |
by fietsschuur Fri, Jun 5, 2020 |
|
curved seat and chain stays with dropout by radsurf » Fri, May 29, 2020 |
7 |
by radsurf Tue, Jun 2, 2020 |
|
Bike cad pro license renting ? by sorg » Wed, May 27, 2020 |
1 |
by Brent Wed, May 27, 2020 |
|
Stay Auxiliary View by brewery » Fri, May 8, 2020 |
3 |
by Brent Mon, May 11, 2020 |
|
All the dimensions by BAHL Cycle Works » Tue, Apr 28, 2020 |
4 |
by BAHL Cycle Works Tue, Apr 28, 2020 |
|
Is there a parameter archive? by Paul L » Mon, Apr 27, 2020 |
2 |
by Paul L Tue, Apr 28, 2020 |
|
File Access from iCloud Drive or NAS by Vertigo Cycles » Thu, Apr 2, 2020 |
2 |
by Vertigo Cycles Sun, Apr 5, 2020 |
|
BikeCAD Pro reads as if not the Pro version by bikingman » Tue, Mar 10, 2020 |
3 |
by Brent Fri, Mar 13, 2020 |
|
Import dropout design from my CAD by john8 » Mon, Feb 24, 2020 |
2 |
by john8 Tue, Feb 25, 2020 |
|
ISO4210-2, Please remind me what it's for by john8 » Wed, Feb 19, 2020 |
2 |
by john8 Mon, Feb 24, 2020 |
|
Custom Saddle Build (Specialized Power) by mikehanseen » Tue, Feb 18, 2020 |
1 |
by Brent Wed, Feb 19, 2020 |
|
Miter betwen seat stay and seat tube by Vali » Mon, Feb 10, 2020 |
2 |
by Vali Wed, Feb 12, 2020 |
|
Shape Tubing Mitre Template by Oxia Cycles » Thu, Jan 30, 2020 |
5 |
by Brent Sat, Feb 8, 2020 |
|
Tube Lengths and Miter Templates by RedOctober357 » Fri, Jan 24, 2020 |
1 |
by Brent Sun, Jan 26, 2020 |
|
Bike cad 15 won't run/install? by Danielvetpath » Tue, Nov 12, 2019 |
16 |
by scherrit Tue, Jan 14, 2020 |
|
BikeCAD Pro on Chromebook? by stevenshand » Sun, Aug 3, 2014 |
5 |
by Tim1970 Tue, Jan 7, 2020 |
|
Watermark or Scale? by Carl Strong » Sun, Dec 15, 2019 |
2 |
by Carl Strong Wed, Dec 18, 2019 |
|
Uploading Logo For Downtube by bluesteelfab » Fri, Dec 13, 2019 |
1 |
by Brent Fri, Dec 13, 2019 |
|
Resources for choosing steel tubing size/diameter? by Danielvetpath » Wed, Oct 12, 2016 |
2 |
by Danielvetpath Tue, Nov 12, 2019 |
|
Bikecad pro on Mac OS catalina by twohands » Mon, Nov 11, 2019 |
2 |
by twohands Mon, Nov 11, 2019 |
|
New BikeCad 15 by Kontorist » Sat, Nov 9, 2019 |
0 |
by Kontorist Sat, Nov 9, 2019 |
|
Fenders in chainstay view by magnoliacycles » Fri, Sep 27, 2019 |
2 |
by magnoliacycles Sat, Sep 28, 2019 |
|
Crank arm length in 173 by DMCX » Sun, Sep 22, 2019 |
2 |
by DMCX Mon, Sep 23, 2019 |
|
Fork steerer angle by MFinlayson » Mon, Sep 9, 2019 |
1 |
by Brent Mon, Sep 9, 2019 |
|
Mitering Aero tubing by psynydebikes » Mon, Jul 22, 2019 |
2 |
by psynydebikes Wed, Jul 24, 2019 |
|
Problem with templates by Oxia Cycles » Mon, Jun 24, 2019 |
2 |
by Oxia Cycles Fri, Jul 19, 2019 |
|
3 bend chain stays by veloatelier » Wed, Jul 3, 2019 |
1 |
by Brent Wed, Jul 3, 2019 |
|
Replacing dimension labels by Carl Strong » Fri, Jun 28, 2019 |
8 |
by Carl Strong Sat, Jun 29, 2019 |
|
Braze-ons: is there a way of adding them? by pimpmasterjazz » Wed, Mar 18, 2015 |
5 |
by Brent Sat, Jun 22, 2019 |
|
Seat Tube Angle by bluesteelfab » Sun, Jun 16, 2019 |
1 |
by Brent Mon, Jun 17, 2019 |
|
Problem saving designs on local disc by anubah » Sat, May 25, 2019 |
2 |
by anubah Sun, May 26, 2019 |
|
e bike motor cabinets by selemma_cycles » Fri, Apr 26, 2019 |
3 |
by Brent Fri, Apr 26, 2019 |
|
Super 73 Frame design - Vintage motorcycle style by Olebikes » Thu, Mar 28, 2019 |
2 |
by Felipe Caprioli Tue, Apr 23, 2019 |
|
Bosch eBike system by fietsschuur » Wed, Mar 20, 2019 |
2 |
by fietsschuur Thu, Mar 21, 2019 |
|
Is BikeCAD pro faster ? by octet8 » Fri, Feb 1, 2019 |
2 |
by octet8 Sun, Mar 10, 2019 |
|
PC specification by MFinlayson » Tue, Apr 11, 2017 |
3 |
by 30rajesh89@gmail.com Fri, Feb 8, 2019 |
|
Touch screen zoom by glr » Fri, Feb 1, 2019 |
1 |
by Brent Sat, Feb 2, 2019 |
|
Typeface installation by Filament » Wed, Jan 16, 2019 |
4 |
by Filament Thu, Jan 17, 2019 |
|
How to find or define my Bottom Bracket spindle length in Bikecad Pro by bulkosos » Fri, Jan 11, 2019 |
1 |
by Brent Sat, Jan 12, 2019 |
|
Reducing Saddle Length by patpot44 » Sun, Jul 9, 2017 |
4 |
by Brent Sun, Jan 6, 2019 |
|
SS-ST-TT cluster mittering template by rizzo_cycles » Sat, Nov 3, 2018 |
2 |
by Oxia Cycles Thu, Dec 20, 2018 |
|
Discrepency in Saddle tip to Grips Measures by patpot44 » Sat, Dec 15, 2018 |
3 |
by Brent Tue, Dec 18, 2018 |
|
Ebike seat tube by tedwojcik » Sat, Dec 15, 2018 |
1 |
by Brent Sat, Dec 15, 2018 |
|
different forks geometry by rizzo_cycles » Fri, Nov 30, 2018 |
2 |
by rizzo_cycles Fri, Nov 30, 2018 |
|
export pdf problems by adamdoc12 » Mon, Nov 12, 2018 |
1 |
by Brent Mon, Nov 12, 2018 |
|
Drop Out Q: by falsea » Thu, Nov 8, 2018 |
2 |
by falsea Fri, Nov 9, 2018 |
|
Cannot export miter templates by jkoutrouba » Tue, Nov 6, 2018 |
3 |
by jkoutrouba Wed, Nov 7, 2018 |
|
sloping toptube by crcdesign » Tue, Nov 6, 2018 |
1 |
by Brent Tue, Nov 6, 2018 |
|
Installation seems to fail and saved files are not visible in Explorer by Xayok » Sat, Oct 13, 2018 |
6 |
by Xayok Wed, Oct 17, 2018 |
|
frame primary dimension by Felix Wyns » Mon, Oct 8, 2018 |
1 |
by Brent Mon, Oct 8, 2018 |
|
Modern MTB wheel sizes by tcorwin » Mon, Sep 24, 2018 |
2 |
by tcorwin Tue, Sep 25, 2018 |
|
title block by tedwojcik » Wed, Sep 19, 2018 |
1 |
by Brent Wed, Sep 19, 2018 |
|
Lock the frame dimensions then change the fork AC length by tally47 » Thu, Aug 30, 2018 |
2 |
by tally47 Tue, Sep 11, 2018 |
|
Fork design by tedwojcik » Thu, Sep 6, 2018 |
2 |
by tedwojcik Fri, Sep 7, 2018 |
|
Wheel display by tedwojcik » Thu, Aug 30, 2018 |
2 |
by tedwojcik Sat, Sep 1, 2018 |
|
Head tube length by poe82 » Mon, Aug 20, 2018 |
2 |
by poe82 Mon, Aug 20, 2018 |
|
fender option by DMCX » Mon, Jul 30, 2018 |
5 |
by smithhaddon123 Wed, Aug 1, 2018 |
|
Changing dimension value by Carl Strong » Sun, Jul 29, 2018 |
1 |
by Brent Mon, Jul 30, 2018 |
|
Converting specs to BikeCAD sample. by funkyblue » Wed, Jul 18, 2018 |
2 |
by funkyblue Sat, Jul 28, 2018 |
|
Spin Bike by Joule Cycling » Mon, Jul 23, 2018 |
1 |
by Brent Mon, Jul 23, 2018 |
|
Low Pedal Position Tandem by jaybeeboston » Sun, Jul 8, 2018 |
2 |
by jaybeeboston Mon, Jul 9, 2018 |
|
Panel movement on paint by Peter Bird » Thu, Jun 7, 2018 |
4 |
by Brent Sun, Jul 1, 2018 |
|
How to change the size of the Open and Save dialog boxes by MILES Radsport » Tue, May 8, 2018 |
2 |
by MILES Radsport Wed, May 9, 2018 |
|
Screen Resolution by Fin » Thu, Apr 5, 2018 |
2 |
by Fin Wed, May 2, 2018 |
|
Change color - Always applies to background, not components. by macatarere » Mon, Apr 23, 2018 |
3 |
by Brent Wed, Apr 25, 2018 |
|
Adjusting Aerobars height by patpot44 » Sun, May 28, 2017 |
3 |
by Tarmacadam Sun, Apr 22, 2018 |
|
MTB Designs by patpot44 » Sat, Apr 21, 2018 |
1 |
by Brent Sat, Apr 21, 2018 |
|
Problem Installing BikeCad Pro 13.5 by cmscycle » Sun, Apr 1, 2018 |
1 |
by Brent Sun, Apr 1, 2018 |
|
Dual Monitor Issue (I think) by falsea » Wed, Mar 7, 2018 |
2 |
by falsea Thu, Mar 8, 2018 |
|
own BrandLogo by Moritzberg » Tue, Feb 6, 2018 |
3 |
by Henry Thomas Sat, Mar 3, 2018 |
|
Viewing the Rider animation on BikeCad Pro Free Version by arthurpveysey@h... » Wed, Feb 28, 2018 |
1 |
by Brent Thu, Mar 1, 2018 |
|
Transfer a given geometry to BikeCad by Niemannk » Tue, Feb 27, 2018 |
2 |
by Brent Tue, Feb 27, 2018 |
|
Birds Eye View by Joule Cycling » Mon, Jan 8, 2018 |
1 |
by Brent Mon, Jan 8, 2018 |
|
Presets + templates gone with 13.5 upgrade by falsea » Sun, Jan 7, 2018 |
2 |
by falsea Mon, Jan 8, 2018 |
|
How do I display Lug angles by Lemon » Sat, Jan 6, 2018 |
2 |
by Lemon Sun, Jan 7, 2018 |
|
Bill of Materials by Njord » Sat, Dec 23, 2017 |
1 |
by Brent Sun, Dec 24, 2017 |
|
Free version of Bikecad does work! by widowfield » Tue, Nov 21, 2017 |
13 |
by Brent Wed, Dec 13, 2017 |
|
Showing Aerobars and Handlebars in Report by patpot44 » Tue, Dec 5, 2017 |
2 |
by patpot44 Thu, Dec 7, 2017 |
|
Seat stays to top tube by tally47 » Tue, Dec 5, 2017 |
1 |
by Brent Wed, Dec 6, 2017 |
|
Rear dropouts by Kontorist » Thu, Nov 30, 2017 |
1 |
by Brent Wed, Dec 6, 2017 |
|
Belt - tooth to tooth by Kontorist » Sat, Nov 4, 2017 |
2 |
by Kontorist Sun, Nov 5, 2017 |
|
Columbus Aero Megatube by jgerhardt » Mon, Sep 14, 2015 |
10 |
by Brent Sat, Oct 7, 2017 |
|
how do I get a BMX drop out to my current frame? by retromike3 » Sat, Sep 9, 2017 |
1 |
by Brent Sat, Sep 9, 2017 |
|
Non drive side view by Sherwood » Fri, Sep 8, 2017 |
2 |
by Sherwood Fri, Sep 8, 2017 |
|
another head tube question by retromike3 » Sat, Sep 2, 2017 |
1 |
by Brent Sun, Sep 3, 2017 |
|
Mixte Seat-stays Aux View by falsea » Wed, Aug 23, 2017 |
2 |
by falsea Thu, Aug 24, 2017 |
|
having trouble downloading by retromike3 » Wed, Aug 16, 2017 |
1 |
by Brent Fri, Aug 18, 2017 |
|
24 by 1.75 wheel by retromike3 » Tue, Aug 15, 2017 |
1 |
by Brent Wed, Aug 16, 2017 |
|
Seat Stay/Set Tub intersection. by adrian3 » Thu, Aug 10, 2017 |
1 |
by Brent Thu, Aug 10, 2017 |
|
Program stalls by falsea » Thu, Jul 27, 2017 |
3 |
by Brent Tue, Aug 1, 2017 |
|
Fore/Aft by Joule Cycling » Sun, Jul 9, 2017 |
8 |
by fietsschuur Wed, Jul 26, 2017 |
|
Save Active (Checked) Dimensions by cblandford » Tue, Jun 6, 2017 |
2 |
by cblandford Sat, Jun 10, 2017 |
|
Jig Setup Dimension - JFX and JFY? by rpiontek » Thu, Jun 8, 2017 |
1 |
by Brent Thu, Jun 8, 2017 |
|
Long John by volanda » Thu, Apr 13, 2017 |
1 |
by Brent Thu, Apr 13, 2017 |
|
Curved Seat Stays by Wooley » Mon, Apr 3, 2017 |
1 |
by Brent Mon, Apr 3, 2017 |
|
Frame ghost images by wefunk222 » Fri, Mar 31, 2017 |
1 |
by Brent Fri, Mar 31, 2017 |
|
Error Invoking Method by Cyco » Sat, Mar 4, 2017 |
2 |
by Cyco Thu, Mar 30, 2017 |
|
Steering Geometry by Grey Steel Bikeworks » Sat, Mar 25, 2017 |
2 |
by Grey Steel Bikeworks Sat, Mar 25, 2017 |
|
View of riding position by gigo » Fri, Jan 27, 2017 |
4 |
by gigo Fri, Mar 3, 2017 |
|
Cutting Bent Down Tube 29ER by tenburner » Tue, Feb 14, 2017 |
7 |
by tenburner Fri, Mar 3, 2017 |
|
wall thickness by biker_07 » Wed, Mar 1, 2017 |
1 |
by Brent Thu, Mar 2, 2017 |
|
Wheel Dialog by volanda » Fri, Feb 24, 2017 |
1 |
by Brent Fri, Feb 24, 2017 |
|
How did I name the dimensions? by timleicester » Thu, Feb 2, 2017 |
2 |
by timleicester Mon, Feb 6, 2017 |
|
40mm Tires by Wooley » Thu, Jan 5, 2017 |
2 |
by Wooley Sat, Jan 28, 2017 |
|
Changing the Insertion Point of Top Tube by patpot44 » Wed, Dec 28, 2016 |
3 |
by Brent Fri, Dec 30, 2016 |
|
Stays centered on page to print by Sherwood » Thu, Dec 29, 2016 |
2 |
by Sherwood Fri, Dec 30, 2016 |
|
Gap between tire and CS/SS by falsea » Thu, Dec 22, 2016 |
2 |
by falsea Sun, Dec 25, 2016 |
|
Changing Text Logo on the bike tubes by patpot44 » Thu, Dec 22, 2016 |
2 |
by patpot44 Fri, Dec 23, 2016 |
|
seat tube usually terminates on bb but... by ajffoulkes1 » Thu, Dec 8, 2016 |
1 |
by Brent Fri, Dec 9, 2016 |
|
Dropper Post Color by jgerhardt » Tue, Nov 29, 2016 |
1 |
by Brent Tue, Nov 29, 2016 |
|
Blurry icons and display in version 13 by Brent » Fri, Nov 18, 2016 |
0 |
by Brent Sat, Nov 19, 2016 |
|
Toe clearance by Kontorist » Wed, Oct 26, 2016 |
2 |
by Kontorist Wed, Oct 26, 2016 |
|
Showing disc tabs w/o the brakes by jgerhardt » Tue, Dec 10, 2013 |
5 |
by thrust Tue, Oct 11, 2016 |
|
Tire clearance design at bottom bracket by mike_mccue » Wed, Sep 14, 2011 |
4 |
by Brent Sat, Oct 8, 2016 |
|
Sharing configurations between Mac & PC? by armitage » Mon, Oct 3, 2016 |
1 |
by Brent Mon, Oct 3, 2016 |
|
Importing fonts? by Slapshot » Mon, Sep 26, 2016 |
3 |
by Brent Tue, Sep 27, 2016 |
|
Through-axles? by Colmor » Mon, Feb 29, 2016 |
2 |
by Tyler Mon, Sep 26, 2016 |
|
Edit/overwrite custom component? by Tyler » Sun, Sep 25, 2016 |
2 |
by Tyler Mon, Sep 26, 2016 |
|
Account for sag? by Danielvetpath » Sun, Sep 18, 2016 |
2 |
by Danielvetpath Sun, Sep 18, 2016 |
|
effective Seat tube angle? by jgerhardt » Wed, Dec 10, 2014 |
7 |
by Brent Sat, Sep 17, 2016 |
|
Wheels and Frame stuff by retromike3 » Fri, Sep 16, 2016 |
1 |
by Brent Sat, Sep 17, 2016 |
|
Font / Logo Dialog box by DMCX » Mon, Aug 8, 2016 |
2 |
by DMCX Tue, Aug 9, 2016 |
|
Handle bar hit point by Cyco » Mon, Aug 1, 2016 |
1 |
by Brent Tue, Aug 2, 2016 |
|
rear brake by Kontorist » Tue, Jul 19, 2016 |
2 |
by Kontorist Wed, Jul 20, 2016 |
|
Paint won't Show by wefunk222 » Mon, Jul 11, 2016 |
1 |
by Brent Mon, Jul 11, 2016 |
|
Version 12.5 Windows 10 by jeromecycles » Sat, Jul 2, 2016 |
2 |
by Brent Sat, Jul 2, 2016 |
|
Albatross Handlebars by jaybeeboston » Tue, Jun 21, 2016 |
2 |
by jaybeeboston Sat, Jun 25, 2016 |
|
File corrupted while setting toptube curve by Tyler » Fri, Jun 24, 2016 |
1 |
by Brent Sat, Jun 25, 2016 |
|
Struggling to match dimensions by Brainjuice » Sun, Jun 12, 2016 |
4 |
by Brent Thu, Jun 23, 2016 |
|
I.S mount for 140mm rotor by cj0 » Wed, Jun 15, 2016 |
2 |
by cj0 Thu, Jun 16, 2016 |
|
Displaying Clearance Between Tire and Stays by ameade » Sun, May 29, 2016 |
1 |
by Brent Sun, May 29, 2016 |
|
remove the ghost bike that is showing behind the current design by robjanehaycock » Tue, May 24, 2016 |
1 |
by Brent Tue, May 24, 2016 |
|
How to increase icon size? by narrowharrow » Sun, May 1, 2016 |
1 |
by Brent Tue, May 3, 2016 |
|
"Display" window lost, outside screen boundaries by narrowharrow » Sun, May 1, 2016 |
1 |
by Brent Sun, May 1, 2016 |
|
Changing fork length while fixing frame dimensions by Oliver Davey » Wed, Apr 27, 2016 |
1 |
by Brent Wed, Apr 27, 2016 |
|
dimensions wont go away ? by michelvanaar » Tue, Mar 15, 2016 |
4 |
by Brent Sat, Apr 23, 2016 |
|
Cantilever Bridges by Kontorist » Tue, Apr 19, 2016 |
4 |
by Kontorist Thu, Apr 21, 2016 |
|
Selecting Tandem Dropouts by tim@velosmith.com.au » Mon, Apr 18, 2016 |
2 |
by tim@velosmith.com.au Tue, Apr 19, 2016 |
|
Standover to the top of mixte seat stays by jkoutrouba » Tue, Mar 1, 2016 |
2 |
by jkoutrouba Thu, Mar 3, 2016 |
|
Miter template for non-round, non-aero, non-oval tubing by 3Spades » Wed, Mar 2, 2016 |
1 |
by Brent Thu, Mar 3, 2016 |
|
Two things I can't seem to get rid of by Ryan Noir » Mon, Feb 22, 2016 |
1 |
by Brent Mon, Feb 22, 2016 |
|
Seat Tube Top by jgerhardt » Wed, Feb 3, 2016 |
2 |
by jgerhardt Thu, Feb 4, 2016 |
|
Windows 10 problem by john8 » Tue, Nov 24, 2015 |
18 |
by Brent Tue, Feb 2, 2016 |
|
Custom Dropouts by rumisic » Thu, Jan 28, 2016 |
1 |
by Brent Fri, Jan 29, 2016 |
|
I forgot by retromike3 » Sat, Jan 16, 2016 |
1 |
by Brent Sat, Jan 16, 2016 |
|
Specifying document size in PDF export by Guy Washburn » Sat, Dec 26, 2015 |
2 |
by Guy Washburn Mon, Dec 28, 2015 |
|
print drawing by michelvanaar » Mon, Nov 2, 2015 |
1 |
by Brent Tue, Nov 3, 2015 |
|
Export SVG with Stays (auxiliary view) by TotemBikes » Tue, Oct 27, 2015 |
2 |
by TotemBikes Tue, Oct 27, 2015 |
|
Modelling chain stays from drawings by jimatwave » Sun, Oct 11, 2015 |
2 |
by jimatwave Mon, Oct 12, 2015 |
|
Braze on Integrated Head Cups? by Rourkie » Thu, Jan 29, 2015 |
3 |
by Brent Tue, Oct 6, 2015 |
|
Fixing Chainline Offset - Hub to Sprocket Offset by charlesrg » Sun, Oct 4, 2015 |
2 |
by charlesrg Tue, Oct 6, 2015 |
|
Configuration file location by Cyco » Fri, Sep 18, 2015 |
3 |
by Brent Tue, Sep 22, 2015 |
|
Documenting a bicycle setup using specs from Retül by Brent » Thu, Jul 17, 2014 |
1 |
by ergottwheels Sat, Sep 19, 2015 |
|
Installing 12.5 on Windows 10 by Cyco » Sun, Sep 13, 2015 |
2 |
by Cyco Wed, Sep 16, 2015 |
|
Jig export by Stefanos » Fri, Sep 11, 2015 |
1 |
by Brent Sat, Sep 12, 2015 |
|
chainstay flush with bb by michelvanaar » Sun, Sep 6, 2015 |
2 |
by michelvanaar Mon, Sep 7, 2015 |
|
BikeCad Pro and Bike Machinery Hydra by Libertecycles » Thu, Aug 6, 2015 |
1 |
by JFW Sun, Aug 9, 2015 |
|
seatstay length? by nakedbikes » Wed, Aug 5, 2015 |
1 |
by Brent Thu, Aug 6, 2015 |
|
Hooded dropout values by ANDY4 » Wed, Apr 17, 2013 |
5 |
by Brent Sun, Aug 2, 2015 |
|
Need help installing BikeCAD pro on Windows 7 by Pi Guy » Thu, Nov 3, 2011 |
1 |
by Brent Sat, Jul 4, 2015 |
|
Box and Carriers by Kontorist » Sat, Jun 27, 2015 |
1 |
by Brent Tue, Jun 30, 2015 |
|
Corrupt file? by gofaster43 » Mon, Jan 5, 2015 |
6 |
by Brent Mon, Jun 15, 2015 |
|
BikeCad 12.0 on Ubuntu Problems by PhilMac » Wed, May 27, 2015 |
1 |
by Brent Wed, May 27, 2015 |
|
Curved stays doesn't hold VR dimensions by efoncubierta » Thu, May 21, 2015 |
1 |
by Brent Thu, May 21, 2015 |
|
Can't Delete Linear Dimension Line by ebnelson » Mon, May 4, 2015 |
3 |
by ebnelson Mon, May 4, 2015 |
|
Head tube height by TRL » Wed, Apr 29, 2015 |
2 |
by TRL Wed, Apr 29, 2015 |
|
rear disc brake reinforcement strut by MILES Radsport » Wed, Sep 3, 2014 |
3 |
by Brent Tue, Mar 31, 2015 |
|
How to make T.T. horizontal? by john8 » Mon, Mar 23, 2015 |
1 |
by Brent Mon, Mar 23, 2015 |
|
v12 Dropouts by Cyco » Sat, Mar 21, 2015 |
2 |
by Cyco Mon, Mar 23, 2015 |
|
Any mechanical engineers using BikeCad? by bmikiten » Thu, Mar 19, 2015 |
0 |
by bmikiten Thu, Mar 19, 2015 |
|
Double bike contour by leonidnk » Sun, Mar 15, 2015 |
2 |
by leonidnk Sun, Mar 15, 2015 |
|
can t install bikecad pro by martindw1 » Mon, Jan 5, 2015 |
2 |
by gofaster43 Mon, Jan 5, 2015 |
|
Bicycle chopper chain frame custom by yavor » Mon, Dec 22, 2014 |
3 |
by Brent Fri, Jan 2, 2015 |
|
Window behavior in 11.72 Mac OSX by metier-velo@gma... » Sat, Nov 15, 2014 |
6 |
by Brent Fri, Nov 21, 2014 |
|
Title block by tedwojcik » Wed, Oct 29, 2014 |
4 |
by Brent Fri, Oct 31, 2014 |
|
Print Full Size Bike by jawillis93 » Fri, Oct 17, 2014 |
1 |
by Brent Fri, Oct 17, 2014 |
|
Paper sizing by Cyco » Fri, Oct 10, 2014 |
2 |
by Brent Sat, Oct 11, 2014 |
|
Configuration folders BikeCAD 11.5 for Mac Code signed by Vertigo Cycles » Fri, Oct 3, 2014 |
3 |
by Brent Mon, Oct 6, 2014 |
|
Paint the inside of stays by Gromski » Tue, Sep 30, 2014 |
2 |
by Gromski Wed, Oct 1, 2014 |
|
Tapered Steerers by FCC » Wed, May 14, 2014 |
2 |
by Brent Sun, Sep 7, 2014 |
|
Front Caliper Brake Location by comarecycles » Sat, Aug 30, 2014 |
2 |
by comarecycles Sat, Aug 30, 2014 |
|
need to turn off extra feet and tubes by retromike3 » Sat, Aug 16, 2014 |
1 |
by Brent Sat, Aug 16, 2014 |
|
Distorted Rider by Georgena Terry » Mon, Sep 16, 2013 |
2 |
by nechaev.dmitry Mon, Aug 4, 2014 |
|
Bikecad 11 to slow by PikeBikes » Thu, Jul 17, 2014 |
14 |
by Brent Sat, Aug 2, 2014 |
|
Multiple viewing windows by sboggs » Wed, Aug 29, 2012 |
1 |
by Brent Wed, May 14, 2014 |
|
Headsets for Tapered Steerers by jgerhardt » Tue, May 6, 2014 |
1 |
by Brent Wed, May 7, 2014 |
|
bike cad pro 10 crash by bicirodagira » Thu, Nov 21, 2013 |
3 |
by rswiftcycles Sun, Apr 20, 2014 |
|
BikeCAD Pro version 10 by magnoliacycles » Sat, Oct 26, 2013 |
5 |
by rswiftcycles Tue, Apr 8, 2014 |
|
Simple question about tube measuring for cutting by Irony Cycleworks » Wed, Jul 10, 2013 |
1 |
by Brent Thu, Apr 3, 2014 |
|
I can't get 8.1 to work on my laptop by retromike3 » Thu, Apr 3, 2014 |
2 |
by retromike3 Thu, Apr 3, 2014 |
|
Step Through Frame by jaybeeboston » Mon, Mar 17, 2014 |
3 |
by Brent Wed, Mar 26, 2014 |
|
Basic angle question: Interior vs miter? by thinair » Fri, Mar 14, 2014 |
2 |
by thinair Sat, Mar 15, 2014 |
|
Bike Cad forgets the saddle height by TotemBikes » Tue, Mar 11, 2014 |
1 |
by Brent Tue, Mar 11, 2014 |
|
Double Curved Top Tube? by tony.ferguson » Sat, Mar 8, 2014 |
5 |
by tony.ferguson Mon, Mar 10, 2014 |
|
Mitre templates for hooded dropouts - possible workaround? by R Warren » Mon, Feb 24, 2014 |
0 |
by R Warren Mon, Feb 24, 2014 |
|
How to Measure a Rider for the Rider Anatomy Tab? by rastering » Tue, Feb 4, 2014 |
4 |
by rastering Tue, Feb 11, 2014 |
|
Columbus Max tubing and BikeCAD Pro miter templates by findlj » Tue, Aug 14, 2012 |
3 |
by Brent Fri, Jan 24, 2014 |
|
Aspect Ratio on Laptop by ncernitz » Thu, Jan 16, 2014 |
2 |
by ncernitz Sun, Jan 19, 2014 |
|
Angles, angles, angles!!!! ARRRRH by fatguyslim » Mon, Nov 4, 2013 |
2 |
by fatguyslim Fri, Nov 15, 2013 |
|
How to change down tube / or create not standard frame by danack » Thu, Oct 24, 2013 |
1 |
by Brent Thu, Oct 24, 2013 |
|
Turn off drivetrain in Stay Aux view? by pereiracycles » Thu, Oct 10, 2013 |
1 |
by Brent Thu, Oct 10, 2013 |
|
Create a new frame using a picture by danack » Fri, Sep 27, 2013 |
2 |
by danack Sat, Sep 28, 2013 |
|
bicycle end vision by fonsu » Thu, Sep 26, 2013 |
2 |
by fonsu Fri, Sep 27, 2013 |
|
Default saddle dimensions by jinpuu » Fri, Jul 19, 2013 |
2 |
by jinpuu Sat, Jul 20, 2013 |
|
Miter Template size by Dylan T » Wed, Jun 26, 2013 |
2 |
by Dylan T Thu, Jun 27, 2013 |
|
"Lugs with Panel" panel position by Wade Patton » Sun, May 12, 2013 |
2 |
by Wade Patton Mon, May 13, 2013 |
|
Display is distorted by customfab » Sat, Dec 1, 2012 |
3 |
by Wade Patton Sun, May 12, 2013 |
|
Importing CAD file types by Tyler » Sun, Apr 21, 2013 |
1 |
by Brent Sun, Apr 21, 2013 |
|
bottom bracket drop by retromike3 » Sat, Apr 13, 2013 |
1 |
by Tuesday Sun, Apr 14, 2013 |
|
Tandem Design Work-around? by Smudgemo » Fri, Apr 5, 2013 |
2 |
by 1930harley Wed, Apr 10, 2013 |
|
Anvil Jig setup by vrbicycles » Mon, Apr 1, 2013 |
1 |
by Brent Mon, Apr 1, 2013 |
|
Seatstays mitering template in 9.15 by edelbikes » Wed, Jan 30, 2013 |
9 |
by Brent Fri, Mar 29, 2013 |
|
Is there a way to display wheel flop on the drawing itself? by mooaxaca » Wed, Mar 13, 2013 |
4 |
by Brent Fri, Mar 15, 2013 |
|
BikeCAD Pro by davidace » Tue, Sep 13, 2011 |
6 |
by Brent Fri, Mar 8, 2013 |
|
seat tube extension above top tube by customfab » Mon, Mar 4, 2013 |
1 |
by Brent Wed, Mar 6, 2013 |
|
Crankset specifications dialog by Meriwether » Thu, Feb 7, 2013 |
2 |
by Meriwether Mon, Feb 11, 2013 |
|
Through hole miter by wackor » Thu, Jan 24, 2013 |
1 |
by Brent Thu, Jan 24, 2013 |
|
Move Bottom Bracket to downtube by sscruisers » Mon, Jan 14, 2013 |
1 |
by Brent Mon, Jan 14, 2013 |
|
drawing cable stoppers and guides by MILES Radsport » Sat, Dec 29, 2012 |
1 |
by Brent Sat, Dec 29, 2012 |
|
cross bike top tube by retromike3 » Sat, Oct 6, 2012 |
1 |
by Brent Fri, Dec 28, 2012 |
|
Migration from 8.1 to 9.0 by hinmaton » Thu, Dec 6, 2012 |
8 |
by Brent Fri, Dec 28, 2012 |
|
9.0 Running Very Sluggish by ncernitz » Thu, Dec 20, 2012 |
2 |
by ncernitz Fri, Dec 21, 2012 |
|
Editing forks, stupid question? by BenSpaCycles » Thu, Dec 20, 2012 |
2 |
by BenSpaCycles Fri, Dec 21, 2012 |
|
seatpost insertion by 18bikes » Mon, Oct 22, 2012 |
4 |
by Brent Fri, Dec 14, 2012 |
|
paint by retromike3 » Wed, Nov 21, 2012 |
1 |
by Brent Wed, Nov 21, 2012 |
|
BikeCad Acting Weird by deepsix » Sun, Nov 11, 2012 |
4 |
by Brent Mon, Nov 12, 2012 |
|
Printing 1:1 scale by Bamboo'd Gear » Fri, Nov 9, 2012 |
1 |
by Brent Sat, Nov 10, 2012 |
|
wheel or not ? by retromike3 » Fri, Nov 2, 2012 |
1 |
by Brent Fri, Nov 2, 2012 |
|
Chain Stay and Rear Brake Bridge Placement by evanhu » Sun, Apr 29, 2012 |
3 |
by Brent Wed, Oct 24, 2012 |
|
Moving the Dimension Measurement lines by The Quijano » Tue, Oct 2, 2012 |
1 |
by Brent Tue, Oct 2, 2012 |
|
templates won't open by mcn » Tue, Aug 21, 2012 |
1 |
by Brent Tue, Aug 21, 2012 |
|
BB DT mitre by yangoose » Sun, Aug 12, 2012 |
1 |
by Brent Sun, Aug 12, 2012 |
|
Sorry can't find forks anymore by otisguy » Tue, Jul 10, 2012 |
4 |
by Brent Thu, Jul 12, 2012 |
|
Design for lug set by yangoose » Mon, Jun 25, 2012 |
1 |
by Brent Mon, Jun 25, 2012 |
|
User Defined angular dimensions by yangoose » Sat, Jun 23, 2012 |
1 |
by Brent Sun, Jun 24, 2012 |
|
Sharing files? by Eric Estlund » Thu, May 24, 2012 |
2 |
by Eric Estlund Sat, May 26, 2012 |
|
Printing full scale drawings by FCC » Tue, Mar 6, 2012 |
6 |
by ameade Mon, May 14, 2012 |
|
Title Block - User Image and Builder Info Issues by azimuthbikes » Sun, May 6, 2012 |
3 |
by Brent Mon, May 14, 2012 |
|
Chain Stay miter template by FCC » Sun, May 6, 2012 |
7 |
by FCC Mon, May 14, 2012 |
|
bring old files in and how to enter measurements by otisguy » Tue, Mar 27, 2012 |
1 |
by Brent Wed, Mar 28, 2012 |
|
curved downtube on 29er? by Meriwether » Tue, Jan 10, 2012 |
4 |
by Brent Wed, Mar 21, 2012 |
|
Where's the Display window ? by edelbikes » Mon, Mar 19, 2012 |
4 |
by Brent Tue, Mar 20, 2012 |
|
Fork Clearances by sizemore » Thu, Mar 1, 2012 |
1 |
by Brent Fri, Mar 2, 2012 |
|
How to remove imported photo? by bvol » Wed, Feb 8, 2012 |
4 |
by nechaev.dmitry Wed, Feb 22, 2012 |
|
bug - when a color is set, the button text is no longer visible by Andrew Heard » Sun, Feb 5, 2012 |
1 |
by Brent Sun, Feb 5, 2012 |
|
bug changing from maximized to restored window size in Windows by Andrew Heard » Tue, Jan 24, 2012 |
3 |
by Brent Thu, Jan 26, 2012 |
|
changing the foot/pedal angle with respect to horizontal by Andrew Heard » Sun, Jan 22, 2012 |
2 |
by Andrew Heard Tue, Jan 24, 2012 |
|
Fork length "L" parameter... by StanleyJ » Mon, Jan 2, 2012 |
5 |
by Brent Wed, Jan 4, 2012 |
|
BCAD designs getting mixed when working with several drawings by info6 » Sun, Dec 18, 2011 |
3 |
by Brent Tue, Dec 20, 2011 |
|
curved top tube plus toe overlap by info6 » Tue, Dec 13, 2011 |
1 |
by Brent Tue, Dec 13, 2011 |
|
Screen Resolutions Issue by Smudgemo » Wed, Nov 16, 2011 |
2 |
by Smudgemo Wed, Nov 16, 2011 |
Log in to post new content in the forum.